Turbulence eats up energy and can slow your boat down
In fact, a study* released in 2006 at the International Conference on Advanced Marine Materials & Coatings in London notes that, 'When the reduction in ship performance is associated with the condition of the ship hull, the effect of the propeller surface condition is often overlooked. Nevertheless, the effect can be significant.' The report concludes that, 'The results of the calculations show that significant losses in propulsive efficiency resulting from blade roughening can be regained by cleaning and polishing of the blades. Alternatively, the efficiency losses could be avoided, perhaps indefinitely, by the application of a paint system that gives a surface finish equivalent to that of a new or well polished propeller. A foul release coating is such a paint system.'
Now boat owners can do their own tests thanks to a new urethane Teflon-type coating from Durall's Smooth Sailing line of boat paints.
Non-stick cookware uses the largest molecule known, a molecule that has a lower drag coefficient than ice. This type of coating was first developed by DuPont and marketed under the name Teflon. Now Durall has made available a clear brush-on coating, using the same molecule, for use on your prop. The coating will never yellow and can be built up to smooth out all those little scratches, pits, and imperfections that can plague your propeller.
Aerospace engineers are currently testing this new coating on boat props in order to verify that reducing drag on the propellers will allow more energy to be transmitted to forward speed and less burned up in friction.
The question for boat owners is why wait for testing data when for under $4 you can quickly apply a non-stick coating on your prop? A new urethane Teflon-type coating with a zinc chromate primer is now available in a prop coating size at www.boat-bottom-paint.com. Judge for yourself if that prop is turning better. After all, it's your tests that really matter.
Effect of a Foul Release Coating on Propeller Noise 2006, by R. J. Mutton, M. Atlar, M. Downie, and C. D. Anderson. International Conference on Advanced Marine Materials & Coatings, London, UK, February 22-23, 2006. A copy of the full report on the propeller study is available at www.boat-bottom-paint.com/press/propeller_study.pdf